If you are in the process of selling your home, there are quick repairs and maintenance or upkeep that you can do to your home. This will help to make it more attractive to potential buyers and attract more interest and offers. Here are some tips from London’s top property buyers to get you on your way.
What’s the maximum potential value of your home
It is important to know the value of your home and well as its potential value. It’s critical to know what you’re working with. You can avoid overspending or over improving the home for the neighborhood it’s located in. Why spend £30,000 if you can only add £10,000 to the value of the property. Check with your realtor and compare prices on the street where you live. Use newspapers and the internet as a guide.
Peak season for selling property
The best times for selling a property is usually in the autumn and spring. After that the market tends to get a lot slower in the months following summer and of course in the winter holidays from Christmas and on into early new year. If you have a choice, it’s best to sell when the market is more active and your chances are better to attract multiple offers.
Maintenance and Repairs Tips
- When selling a home, it’s essential to complete any incomplete DIY projects. Dripping taps, tighten up orv replace knobs, touch up cracks, and chipped woodwork.
- Curb appeal is important. You really only get one chance to make a first impression so let it count. The entrance to your home should be attractive, welcoming, and clean, This indicates a clean well kept home. Spruce up walkways, paths, lawns, gardens, and hedges.
- Check for leaks and signs of water damage everywhere. Repair and replace flashing, missing or broken tiles, blocked drains and gutters with a company like Renton roofing
- A coat of paint can go a far way to improve the appearance of any home and is one of the cheapest and quickest way to change the appearance and feel of a home. Don’t forget the front door. A coat of paint and new shiny hardware will welcome buyers into your home.
- The kitchen is the centre of any home and is very important to most buyers. Depending on your budget, new paint on the walls or varnish on the cabinet doors as well as new fixtures, tiles and work surface if you can afford it, can make an old kitchen look new.
It is better to have a regular plan for maintenance and upkeep of your home that will ward off deterioration rot and decay. That way when it is time to sell your home only small fixes and a little sprucing up will be necessary and extensive expensive repairs won’t be necessary. It is also easy for inspectors, surveyors, and realtors to spot a well kept home instead of one with a few quick cosmetic fixes.
If you are selling a home, contact property buyers at Irvine & Cole.
You may think that just because your home is new, it is probably sealed and resistant to leaks and drafts. Well, think again – new homes can have some of the same problems as homes that have been lived in for many years. This is exactly why you must take measures to not only seal drafts and energy leaks, but you may also want to employ some methods to winterize your home. Winterization ensures that your home can take on some of the common climatic issues that come along in the wintertime, like high energy bills and moisture damage. Here are five factors to consider before air sealing your new home.
Does the attic need insulation? In some new homes, the attic is not insulated, which can cause all sorts of issues and problems. Moisture is one of the biggest issues – the air from your heater can pass through your roof and cause the ice and snow to melt on your roof. To remedy this issue, you definitely need to insulate the attic using a team like Avalanche Roofing
Have you found all the leaks? Do you know where all the leaks are? Before you seal your new home, you want to find all of the leaks first. If you don’t take this very simple measure, your sealing efforts will be incredibly disorganized and you may miss a few drafts. This is why you want to inspect carefully and note where all the leaks are before you start injecting epoxy resin or caulking your window frames. Plus, you may have leaks in your foundation and other areas of your home that you weren’t aware of.
Is the HVAC system in working condition? Another important consideration you want to make is whether your HVAC system is in prime working condition. If you are experiencing higher energy bills, it may be that your HVAC system is the culprit and not the leaks. While there are many emergency heating and air services, the last thing you want is to be left without air conditioning in the summer or heat in the winter. So it’s important to get to the bottom of whatever issues your HVAC unit is having.
How new are the windows? In some cases, your windows may be the sole culprit of all the energy leaks. If you move into an historic home, you may need to seal the windows – there is a high probability that your old windows haven’t been sealed in a long time. If the windows are rather new, there may be another issue going on. Regardless, you want to consider the age of your windows.
Does the insulation have the right R-value? The R-value of insulation measures the effectiveness of insulating a home in a certain climatic region. If you live in a colder region, you may need insulation with a higher R-value. Before you seal your home, you want to find out if the R-value of the insulation in your home is correct for your region. If it isn’t, you may want to replace the insulation in your home – or add to it.